Finally, A Solution To My Annoying Clean Base Leak!

The sealing problem with the clean base is an issue that pertains to the integrity of the seal around the base of a clean room. This problem is most often seen when there is a disruption in. Reinstall the used water tank: Put the used water tank back into the base station and give it a gentle press down to ensure it's properly installed. A good fit is key to avoiding leaks.

If you find that after cleaning the mop, the sewage from the washboard at the bottom of the base station is not pumped into the sewage tank, and the water overflows, etc. Make sure the lid is firmly closed and sealed. The roomba monitors the vacuum in the clean base. If it’s too high, the bag is full, or the line to the roomba is clogged. If it’s too low, then.